600L-1000L Beer brewing tanks supplier

600-1000L Beer fermentation tank Description 

Fermenter is also called CCT (Cylindrical Conical Tank), FV (Fermentation Vessel), primary fermentor or unitank as they are used both for fermenting and lagering. 

Fermenting is the process during which the yeast transforms the wort into beer. 

Lagerings takes place after fermenting and is the time given to the beer to stabilize and age after fermenting.

Micet stainless steel fermenter can be individually temperature controlled through glycol jackets and are mostly equipped with accessories such as pressure relief valve, CIP cleaning ball, sample valve,manhole,etc. The design of is based on our vast beer knowledge and especially the conical fermenter bottom and the fact that we combine fermentation and maturation in the same vessel is very important. When calculating your fermenting and lagering capacity and configuration, sufficient time for fermenting and lagering to produce quality beers must be taken into consideration.

Standard Configuration

Tank Capacity: 600L/1000L (+30% Headspace minimum)

Interior Shell: SUS304 full welded; TH=3mm

Exterior Shell:SUS304 full welded; TH=2mm

100% TIG welding with pure argon gas shield

Interior Finish: Overall polishing to 0.4um without dead corner

Insulation: Polyurethane; TH=80mm

Glycol Jacket: Dimpled plate on cone and side

Stringent tank leakage test by water and pressured gas

Stringent Jacket leakage test by water and pressured gas

Dished head and 60 degree cone bottom

Top pressure manway 400mm

CIP arm with 360° CIP spraying ball

Full sanitary sampling valve

Pressure relief valve on top of the tank

Shockproof pressure gauge on CIP arm

Rotating racking arm and port on cone with butterfly valve

Spunding valve on the CIP arm for pressure release

Tri clamp discharge arm with butterfly valve

Thermowell for high accuracy temperature sensor

3pcs completely SUS304 heavy duty legs with leveling pad and legs support

Complete valves, fittings and all parts

Special request

Level tube for special request
Carbonation port and stone for special request

Quality standard

1. All the machines will be customized to 3 phase 380v/50Hz;

2. Construction by high quality SUS 304 food grade stainless steel, all pipes are sus304, all labels are English.

3. All tanks will be tested and detected in the NDT room after finished, to ensure no leakage.

4. All jackets will do water pressure testing, testing pressure: 0.4Mpa, working pressure:0.15Mpa;

5. All tanks will be pressure protection 48hours before leaving from factory;

6. All the welding done by using water to protect the inner tank smooth and jackets uniform.

7. All the welds are TIG full welded, and acid pickled and passivated.

8. All tanks are mirror polishing inside, all ports are recessed type.